Turnkey CDM Solutions are specialized CDM Advisors and Construction Health & Safety Risk Management Consultants, their two directors have a combined experience of 47 years as professionals in the industry and have been involved with the CDM Regulations since their initial implementation in 1995.
The CDM Regulations aim to make health and safety an essential and integral part of the planning and management of construction projects. They place statutory responsibilities on the project duty holders to consider their approach to health and safety, and then to co-ordinate and manage the health and safety
requirements effectively throughout all stages of a construction project e.g. from the initial concept design through to the completion of works on site. The current Regulations, CDM 2015, came into force on the 6th April 2015, replacing CDM 2007. The principal changes to the 2007 Regulations were:
- Strengthening of Client duties
- Introduction of Domestic Clients
- Removal of the CDM Co-ordinator role - under CDM 2007 the Client had a key advisor via the statutory framework of the Regulations, the CDM Coordinator (CDMC)
- Creation of the new role of Principal Designer who is responsible for the planning, managing, monitoring and co-ordination of health and safety during the pre-construction phase
- Requirement for a Principal Designer and Principal Contractor on all projects where there will be more than one contractor working on the project
- Replacement of explicit requirement for duty holder competence with the need for appropriate skills, knowledge, experience and training
- Change to the HSE’s notification threshold
Because CDM 2015 removed the role of CDM Co-ordinator Clients no longer have a statutory advisor on matters relating to construction health and safety risk management, and with the exception of assisting Clients provide Pre-Construction Information none of the Client’s CDM 2015 duties fall onto the Principal Designer. Under CDM 2015 Clients have a legal responsibility to:
- Ensure that construction work is carried out, so far as is reasonably practicable, without risk to the Health and Safety of workers or anyone else that may be affected by the works.
- Ensure that the HSE are notified about the project in accordance with CDM Regulation 6 by way of an F10 notification.
- Ensure that the Principal Contractor and Principal Contractor comply with their respective duties.
- Provide Pre-Construction Information; the Principal Designer has a duty to assist the Client provide PCI but this is the only duty they have in respect of assisting the Client discharge their duties.
- Prepare a Client Brief which is a new requirement under CDM 2015; in accordance with the published CDM 2015 guidance this a statement of the Client’s requirements for the project e.g. design aspirations, budget, quality of workmanship, site considerations and management requirements etc. The Client Brief can be incorporated into a Summary Reference Document (or similar) prepared by the Client or Principal Designer to cross-reference the information contained in the Pre-Construction Information.
- Ensure that prior to the construction phase commencing the Principal Contractor has prepared a Construction Phase Plan.
- Ensure that there are suitable welfare facilities available on-site throughout the construction phase.
- Ensure that health and safety management arrangements are maintained and reviewed throughout the project.
- Ensure that the Principal Designer prepares a Health and Safety File.
- Take reasonable steps to be satisfied that Designers and Contractors have the skills, knowledge and experience and, if they are an organisation the organisational capability, necessary to fulfil the role that they are appointed to undertake.
CDM 2015 has now been in force for three years, and one of the key issues is the increased health and safety responsibilities on Clients, which potentially places them with a greater burden of time, risk and cost. The Regulations recognize the influence and importance of the Client as head of the project supply chain and as the party best placed to set standards throughout a project. Many Clients do not have the resources or the necessary skills, knowledge and experience to discharge their duties under CDM 2015, and over the last three years this has created a new role within construction project teams, the CDM Advisor (CDMA). In the capacity of CDM Advisor, Turnkey CDM Solutions will undertake health and safety duties on behalf of the Client during both the pre-construction and
construction phases of a project and liaise with the other relevant duty holders throughout a project to help to ensure that health and safety is planned, managed and monitored accordingly, and help influence culture when it comes to health and safety risk management. Many Clients do not have the resources or the necessary skills, knowledge and experience to discharge their duties under CDM 2015, and over the last two years this has created a new role within construction project teams, the CDM Advisor (CDMA). The CDMA will undertake health and safety duties on behalf of the Client during both the pre-construction and construction phases of a project.